ConstructionConverter

About ConstructionConverter

Who runs this site

LeadStallion LLC, a small software company, owns ConstructionConverter and keeps its unit converters running at no charge. It isn't a builder, a lumber yard or a materials supplier, and nothing here asks you to register or sign in. Questions and corrections go through the Contact page.

What the converters do

Each converter turns a quantity you already have into the unit you need to buy or order: cubic yards to tons for gravel, sand, topsoil and other bulk materials, board feet for lumber, roofing squares and shingle bundles from a roof's footprint and pitch, square feet to gallons of paint, and bags to cubic yards for concrete mix, mulch, topsoil, sand and gravel. You can run any of them forward or backward, and the address bar keeps your inputs, so a result can be bookmarked or texted to the yard, the crew or a helper.

How the conversions are made

No answer appears on its own: the formula and the figures it relies on are printed beside it. Where those figures come from:

  • Weights come from a stated density for each material, using commonly published construction reference values. Real loads vary with moisture, compaction and grade, so the converter says which density it used.
  • Bag yields for concrete mix are the maker's printed figures (40, 50, 60 and 80 lb bags, from QUIKRETE's Concrete Mix data sheet). Mulch, topsoil, sand and gravel use the common bag sizes sold in stores.
  • Roof area is worked out from the pitch with the real slope factor, the square root of (rise² + 12²) divided by 12, not a rounded chart. Shingle bundles assume 3 bundles a square plus a waste allowance you can change.
  • Board feet use a board's nominal size (a 2x6 is counted as 2 in by 6 in), the lumber trade's convention, even though the finished board is smaller.
  • Paint uses a different coverage rate for each surface, from about 400 sq ft a gallon on smooth painted walls down to about 250 on brick and block, times the number of coats.
  • Whole items such as bags, cans and bundles are always rounded up, never down.

What a conversion is not

A converted figure is an estimate to plan an order around. It is not a price from a supplier, not engineering advice and not a building code review. Wet or packed material, the particular brand on the pallet and the way it goes in can all move the true quantity. Confirm the order with the yard or your contractor first, and take any structural question to a qualified professional. The legal version sits in our Terms of Use.

How the site is paid for

Using a converter costs nothing. Ads and paid referral links may show on some pages, and a few results point to Build Material Planner, a sister site from the same company, when you want a full project materials list. A conversion comes out the same whether or not any of that is on the page. The Privacy Policy lists the data each one gathers.

Found a mistake?

Spot a density, bag yield, coverage rate or worked example that doesn't match what you see on the job? Send it through the Contact page. Notes from landscapers, concrete crews, roofers and yard staff are how these numbers stay right.