Paint Coverage Calculator
Convert square feet to gallons of paint needed, or gallons on hand to the area they'll cover — by surface type and number of coats, with the coverage rate always shown.
Example: Repainting a 12 × 14 ft bedroom: 416 sq ft of wall (8 ft ceiling), 2 coats
These are example numbers, already worked out. Change the inputs above and press the button to work out your own.
- Amount
- 416 sq ft, 2 coat(s)
- Surface
- Smooth drywall / previously painted
Paint needed
2.08 gallons
- Quarts
- 8.32 qt
- Recommended purchase
- 3 gallon can(s)
- Coverage rate assumed
- 400 sq ft/gallon (Smooth drywall / previously painted)
Estimate only, worked out from the inputs shown. Confirm the order with your supplier; for slabs, posts, footings or a roof, check local building code and a licensed contractor.
Assumptions
- Coverage assumes Smooth drywall / previously painted at 400 sq ft per gallon per coat — actual coverage varies by paint brand, application method and surface porosity.
- 2 coat(s) applied — most projects need 2 coats for full, even color coverage.
- Reference data as of 2026-09.
How much paint for a room
Gallons for the walls of common room sizes with 8 ft ceilings, worked out with the converter's own rates: 400 sq ft a gallon over painted walls and 350 on new drywall. The number in brackets is the gallon cans to buy.
| Room | Wall area | Repaint, 1 coat | Repaint, 2 coats | New drywall, 2 coats |
|---|---|---|---|---|
| 10 × 10 ft | 320 sq ft | 0.8 gal (1) | 1.6 gal (2) | 1.83 gal (2) |
| 10 × 12 ft | 352 sq ft | 0.88 gal (1) | 1.76 gal (2) | 2.01 gal (3) |
| 12 × 12 ft | 384 sq ft | 0.96 gal (1) | 1.92 gal (2) | 2.19 gal (3) |
| 12 × 14 ft | 416 sq ft | 1.04 gal (2) | 2.08 gal (3) | 2.38 gal (3) |
| 14 × 16 ft | 480 sq ft | 1.2 gal (2) | 2.4 gal (3) | 2.74 gal (3) |
| 16 × 20 ft | 576 sq ft | 1.44 gal (2) | 2.88 gal (3) | 3.29 gal (4) |
Walls only, with doors and windows left in. For the ceiling, add length × width at the same rate.
How far a quart, gallon and 5-gallon bucket go
Square feet covered on each surface the converter knows, at its coverage rate.
| Surface | 1 quart, 1 coat | 1 gallon, 1 coat | 1 gallon, 2 coats | 5 gallons, 2 coats |
|---|---|---|---|---|
| Smooth drywall / previously painted | 100 sq ft | 400 sq ft | 200 sq ft | 1,000 sq ft |
| Standard new drywall | 87.5 sq ft | 350 sq ft | 175 sq ft | 875 sq ft |
| Textured / stucco | 75 sq ft | 300 sq ft | 150 sq ft | 750 sq ft |
| Masonry / brick / block | 62.5 sq ft | 250 sq ft | 125 sq ft | 625 sq ft |
Subtracting doors, windows and trim
The room table counts every wall as solid. That is the cautious way to buy, but in a room with several doors or a wide window it can push you up a whole can. To get the net figure, measure the wall area, then take off about 21 sq ft for each standard door (3 × 7 ft) and about 15 sq ft for each average window. Measure a patio slider, a bay window or an open archway on its own, since those are much bigger.
Worked example: the 12 × 14 ft bedroom from the table has 416 sq ft of wall. With one door and two windows, that drops to 416 − 21 − 30 = 365 sq ft. Two coats over painted walls then take 365 × 2 ÷ 400 = 1.83 gallons, so 2 cans instead of the 3 the gross figure asks for.
Trim is the opposite case: it is a separate job, usually in a semi-gloss, and it is measured by length. Multiply the linear feet of baseboard, casing or crown by its height in feet. Around that same bedroom, 49 ft of 4 in baseboard is only 16.33 sq ft per coat, which is why trim paint is usually bought by the quart. Doors are painted on both faces, so a slab door counts about twice its opening area.
What this converter does
This tool converts between an area to paint and the gallons of paint needed, using a coverage rate for the surface type you pick and the number of coats. It also works in reverse: tell it how much paint you have, and it estimates the area you can cover.
Hanging new drywall before you paint? The drywall calculator on Build Material Planner works out the sheets, joint compound, tape and screws for the room, plus a cost range.
How the math works
- Sq ft → gallons: (sq ft × coats) ÷ coverage rate (sq ft per gallon for the surface).
- Gallons → sq ft: (gallons × coverage rate) ÷ coats.
- Recommended purchase: gallons needed, rounded up to a whole gallon can.
Why not just use a generic converter?
There's no fixed unit conversion between area and volume for paint — it depends entirely on how absorbent the surface is and how many coats you're applying. A generic converter can't know that. This tool uses realistic coverage rates for four common surface types and lets you set the number of coats, rather than assuming one number fits every wall.
When the simple estimate is wrong
- A big color change. Covering a dark or saturated color with a pale one rarely works in two coats. Plan a primer coat, ideally tinted toward the new color, and enter it as an extra coat at the primer's own coverage rate.
- Thirsty surfaces. Bare plaster, fresh joint compound, raw wood and unsealed masonry drink the first coat. Pick the matching surface in the converter, and on very rough or porous walls add 10 to 20% on top of its answer.
- Accent walls. One 8 ft high, 12 ft wall is 96 sq ft, so two coats fit in 2 quarts. Small jobs like this are where buying a full gallon by habit wastes the most paint.
- Gable ends and sloped walls. A triangle is half of width × height. A gable 24 ft across that rises 6 ft to the peak adds 72 sq ft per end to an exterior job, which a perimeter × height estimate misses.
- Spraying. An airless sprayer loses paint to overspray and lays a thicker film, so it can use noticeably more than the can's rolled coverage. Buy an extra gallon for a sprayed exterior.
- Ceilings and floors. Neither is in the wall area. Add the ceiling as length × width, and use a floor or porch paint's own coverage figure for decks and concrete.
Worked examples
Two rooms measured and turned into gallons by the paint calculator above. Open one to swap in your own walls and coats.
Repainting a 12 × 14 ft bedroom: 416 sq ft of wall (8 ft ceiling), 2 coats
Wall area is the room's perimeter × wall height: (12 + 14) × 2 × 8 = 416 sq ft. Then (sq ft × coats) ÷ the coverage rate.
- Paint needed: 2.08 gallons
- Quarts: 8.32 qt
- Recommended purchase: 3 gallon can(s)
- Coverage rate assumed: 400 sq ft/gallon (Smooth drywall / previously painted)
A 5-gallon bucket on brick or block, 2 coats
(Gallons × the coverage rate) ÷ coats gives the wall area you can finish.
- Area you can cover: 625 sq ft
- Quarts: 20 qt
- Recommended purchase: 5 gallon can(s)
- Coverage rate assumed: 250 sq ft/gallon (Masonry / brick / block)
Frequently asked questions
How many square feet does a gallon of paint cover?
Between 250 and 400 sq ft per coat, depending on the surface: about 400 on smooth drywall / previously painted, about 350 on standard new drywall, about 300 on textured / stucco, about 250 on masonry / brick / block. Check the coverage printed on your can.
How much paint do I need for a 12x12 room?
A 12 × 12 ft room with 8 ft ceilings has 384 sq ft of wall. Two coats over painted walls take 1.92 gallons, so buy 2; on new drywall it is 2.19 gallons, so buy 3.
How much paint do I need for a 10x10 room?
A 10 × 10 ft room with 8 ft ceilings has 320 sq ft of wall: 0.8 gallons for one coat over painted walls, or 1.6 gallons for two, so 2 gallons covers it.
How much paint do I need for a ceiling?
Multiply the room's length by its width. A 12 × 12 ft ceiling is 144 sq ft, and two coats at 400 sq ft a gallon take 0.72 gallons, so 1 gallon covers it.
How much does a quart of paint cover?
A quarter of what a gallon covers: about 100 sq ft per coat on smooth, painted drywall, down to 62.5 sq ft on masonry. Handy for trim, a door or touch-ups.
How much does a 5-gallon bucket of paint cover?
At two coats, 1,000 sq ft on smooth drywall / previously painted, 875 sq ft on standard new drywall, 750 sq ft on textured / stucco, 625 sq ft on masonry / brick / block. One coat covers twice that.
How do I work out the wall area of a room?
Add up the length of every wall (the perimeter) and multiply by the wall height. A 12 × 14 ft room with 8 ft walls is (12 + 14) × 2 × 8 = 416 sq ft. Leaving doors and windows in, as the table on this page does, leaves a little paint over for touch-ups.
Do I need 1 or 2 coats of paint?
Two coats is standard for full, even color, especially over a different existing color or bare drywall. One coat can work for a touch-up, or with a high-coverage paint-and-primer over a similar color.
How many gallons of paint do I need for a 2,000 sq ft house exterior?
For 2,000 sq ft of exterior wall at two coats: 10 gallons at 400 sq ft a gallon on a smooth, previously painted surface, 13.33 on textured or stucco walls and 16 on brick or block. Round up to whole gallons and check the coverage on your paint's label.
Should I subtract doors and windows when estimating paint?
Yes when the openings are large or many, as in a sunroom or a hall full of doors. Take off about 21 sq ft per door and 15 sq ft per average window. For one door and a window or two, many painters leave them in and treat the difference as touch-up paint.
How much paint for an accent wall?
A 12 ft wide wall at 8 ft is 96 sq ft. Two coats need 0.48 gallons, which is 2 quarts. Deep accent colors often want a third coat or a tinted primer underneath, so check the can before buying only quarts.
Do I need primer before painting a dark color with a light one?
Usually. Going from navy or red to white can take three coats of finish paint, while one coat of primer and two of paint often hides it better and costs less. Count the primer as its own coat, at the coverage printed on the primer can.
How do I estimate paint for baseboards and trim?
Measure trim in linear feet and convert it to area. The baseboard around a 12 × 14 ft room, less a 3 ft door, is 49 ft; at 4 in tall that is about 16.33 sq ft a coat, so a quart of trim paint is plenty.
Why does new drywall take more paint?
Bare drywall and joint compound soak up paint, so the converter uses 350 sq ft a gallon for new drywall against 400 for smooth, painted walls. A coat of primer first helps the finish coats go on evenly.
Limitations
Coverage rates are typical published figures — actual coverage varies by paint brand, color (dark colors and reds often need an extra coat), application method (roller vs. sprayer) and surface porosity. Always check the coverage stated on your specific paint can.
Put this converter on your site
Run a site for suppliers, contractors or DIYers? You can embed the Paint Coverage Calculator as a free widget — responsive, no registration, and nothing added to your page beyond the calculator itself.
Cite this converter
Referencing this converter in coursework, an article or a project write-up? Grab a citation in the format you need: