Material Weight per Cubic Yard
A cubic yard of crushed stone weighs about 2,700 lb (1.35 tons), topsoil about 2,000 lb (1.00 tons), mulch about 500 lb and concrete about 4,050 lb. These are typical figures; ask your supplier for theirs.
Built and checked by ConstructionConverter (LeadStallion LLC) · Last checked
Weight per cubic yard, by material
Each row gives the weight of one cubic yard (27 cubic feet) in pounds and in US short tons of 2,000 lb, and the same figure per cubic foot. Where a source we read gives a range, the range is shown too. The materials marked with a star are the ones our cubic yards to tons converter uses, and the converter reads the same numbers, so the two never disagree.
| Material | lb per cu yd | Tons per cu yd | lb per cu ft | Range, lb per cu yd | Source |
|---|---|---|---|---|---|
| Crushed stone (#57) / gravel * loose | 2,700 | 1.35 | 100 | — | Working figure |
| Crusher run (gravel + fines) loose | 2,970 | 1.49 | 110 | — | Working figure |
| Pea gravel loose | 2,592 | 1.30 | 96 | — | Working figure |
| River rock loose | 2,565 | 1.28 | 95 | — | Working figure |
| Sand (dry, loose) * loose | 2,700 | 1.35 | 100 | — | Working figure |
| Topsoil (moist, loose) * loose | 2,000 | 1.00 | 74 | 2,000–2,300 | Source |
| Fill dirt loose | 2,200 | 1.10 | 81 | — | Working figure |
| Mulch (bark / wood chip) * loose | 500 | 0.25 | 19 | — | Working figure |
| Asphalt millings (RAP) * milled | 2,700 | 1.35 | 100 | 2,700–3,780 | Source |
| Concrete (cured, in place) * in place | 4,050 | 2.03 | 150 | — | Working figure |
* Used by the converter. Figures as of 2026-11-14. Typical values for planning, not a supplier's scale ticket.
To turn any row into an order, multiply the cubic yards you need by the tons per cubic yard. Ten cubic yards of crushed stone is about 13.5 tons, and ten cubic yards of topsoil about 10.0 tons. Going the other way, divide the tons by the same figure. The converter does both directions and shows its working, and it rounds nothing down, so a result is never short.
The gravel, crusher run, pea gravel, river rock, topsoil and fill dirt figures are the same numbers our sister site, Build Material Planner, uses in its gravel and soil planners, so the two sites always quote one weight for one material. The one known gap is topsoil: this site's converter uses 2,000 lb a cubic yard, the bottom of the 2,000 to 2,300 lb range, while the soil planner there uses 2,200 lb, inside the same range.
How much a bag weighs
Concrete mix is sold by weight, so the weight is printed on the bag and the question is how much space it fills once mixed. Mulch, bagged soil and stone are sold by volume, so the bag says how many cubic feet it holds and the weight depends on how wet the contents are.
| Bag | Weight, lb | Volume, cu ft | How we know |
|---|---|---|---|
| Concrete mix, 40 lb bag | 40 | 0.3 | printed weight; yield per QUIKRETE |
| Concrete mix, 50 lb bag | 50 | 0.375 | printed weight; yield per QUIKRETE |
| Concrete mix, 60 lb bag | 60 | 0.45 | printed weight; yield per QUIKRETE |
| Concrete mix, 80 lb bag | 80 | 0.6 | printed weight; yield per QUIKRETE |
| Mulch, 2 cu ft bag | 37 | 2 | worked out from the per-yard figure; sold by volume |
| Mulch, 3 cu ft bag | 56 | 3 | worked out from the per-yard figure; sold by volume |
An 80 lb bag of concrete mix makes about 0.6 cubic feet, so it takes 45 of them to make one cubic yard. A 2 cubic foot bag of mulch at our 500 lb a cubic yard works out to about 37 lb, but a bag that has stood in the rain at the garden centre can weigh much more, and a bone-dry one less. If you are carrying bags by hand or loading a small car, plan on the wet weight. To count bags for a job, use the bags to cubic yards converter.
How much 5 gallons of paint weighs
Interior latex paint weighs about 10.16 to 11.43 lb a gallon on the Sherwin-Williams product data sheets we read, so a 5 gallon pail holds about 51 to 57 lb of paint, before the weight of the pail itself. That is more than water, which weighs about 8.34 lb a gallon (41.7 lb for 5 gallons), because paint carries pigments and fillers such as titanium dioxide that are heavier than water. The weight changes from one product and sheen to the next, and the exact figure is printed on each product's data sheet as "weight per gallon". To work out how many gallons a room needs in the first place, use the paint coverage converter.
Why the same material can weigh more or less
A cubic yard is a measure of space, and how much material fits in that space, and how much water comes with it, changes from load to load. Three things matter most.
- Moisture. Sand, topsoil and mulch hold water. A yard of topsoil that was dug after a week of rain can weigh hundreds of pounds more than the same soil in a dry spell, and wet sand is noticeably heavier than dry sand. Washed stone drains quickly, so it changes less.
- Loose or packed. Material in a pile or a truck bed has air between the pieces. Once it is spread and compacted, the same weight takes up less space, so a compacted yard weighs more. The figures above are for loose material unless the row says otherwise; concrete is the weight of a cured slab.
- Grading and rock type. Crusher run fills the gaps between its stones with fines, so it is heavier than clean #57 stone. Rounded pea gravel and river rock pack differently from angular crushed stone, and some quarries' rock is simply denser than others'.
That is why every figure here is a typical value for planning. Suppliers sell by the ton from a scale or by the yard from a loader bucket, and the conversion they use is the one that counts for your order. When the price is per ton and your plan is in cubic yards, ask the yard what their material weighs per cubic yard, then check it against this table.
Sources and how we checked them
Each figure names where it came from and the date we read it. Where we could not read a free public table for a material, we say so and mark it as our working figure rather than claim a source we have not checked. If you have a published figure that differs, tell us on the Contact page.
- FHWA, User Guidelines for Waste and Byproduct Materials in Pavement Construction (FHWA-RD-97-148), Reclaimed Asphalt Pavement: Material Description, Table 13-2 https://www.fhwa.dot.gov/publications/research/infrastructure/structures/97148/rap131.cfm Unit Weight 1940 - 2300 kg/m3 (120-140 lb/ft3); Compacted Unit Weight 1600 - 2000 kg/m3 (100-125 lb/ft3) Read 2026-11-14.
- USDA NRCS, Soil Quality Indicators: Bulk Density https://www.nrcs.usda.gov/sites/default/files/2023-01/Soil%20Quality-Indicators-Bulk%20Density.pdf Ideal bulk density under 1.60 g/cm3 for sandy soils and under 1.40 g/cm3 for silty soils (about 2,700 and 2,360 lb per cubic yard, dry, in the ground) Read 2026-11-14 (search excerpt; the PDF timed out on a direct read).
- QUIKRETE, Concrete Mix No. 1101 product data sheet (revised October 2022) https://www.quikrete.com/pdfs/data_sheet-concrete%20mix%201101.pdf Yield: 40 lb 0.30, 50 lb 0.375, 60 lb 0.45, 80 lb 0.60 cu ft Read 2026-11-08.
- Sherwin-Williams interior latex product data sheets (Emerald, ProMar 400 Zero VOC) https://sherwin-williams.com/document/PDS/en/035777359679 Weight per Gallon: 10.16 to 11.43 lb across the sheets read (Emerald Interior Latex Satin 11.27 lb) Read 2026-11-14 (search excerpts; the PDFs could not be decoded on a direct read).
- Asphalt Roofing Manufacturers Association (ARMA), Installation of Asphalt Shingles on Lower Sloped Roofs (page dated 2025-07-14) https://www.asphaltroofing.org/installation-of-asphalt-shingles-on-lower-sloped-roofs/ Never apply shingles on roofs with slopes lower than 2" per foot (2:12). Lower slopes are 2:12 to less than 4:12 and need special underlayment procedures. Read 2026-11-15.
- ConstructionConverter working figure, the same number BuildMaterialPlanner.com uses Common published construction value. No free public table was read for it on 2026-11-14. Read 2026-11-14.
Frequently asked questions
In pounds and tons, what is the weight of one cubic yard of gravel?
About 2,700 lb, or 1.35 tons, for loose crushed stone such as #57. Crusher run with its fines is heavier, about 2,970 lb. Ask your supplier for the figure they sell by, because it changes with the stone and how wet it is.
How many tons are in a cubic yard of topsoil?
About 1.00 tons (2,000 lb) for moist, loose topsoil, and up to about 1.15 tons when it is wet. Dry, sandy soil is lighter and clay holding water is heavier.
How much does a bag of mulch weigh?
A 2 cubic foot bag works out to about 37 lb at 500 lb a cubic yard, and a 3 cubic foot bag about 56 lb. Mulch is bagged by volume, not weight, so a bag that sat out in the rain can weigh far more and a dry one less.
How much does 5 gallons of paint weigh?
About 51 to 57 lb of interior latex paint, from the 10.16 to 11.43 lb a gallon on the data sheets we read, plus the weight of the pail. Five gallons of water weighs about 41.7 lb, so paint is roughly a third heavier than water.
How much does a cubic yard of concrete weigh?
About 4,050 lb, or just over 2 tons (2.025), for normal-weight concrete at 150 lb a cubic foot. Lightweight mixes weigh less.
How much does a cubic yard of asphalt millings weigh?
About 2,700 to 3,780 lb (1.35 to 1.89 tons). The FHWA puts milled RAP at 120 to 140 lb a cubic foot and compacted RAP at 100 to 125. Our converter uses the low end, 100 lb a cubic foot.
Why do suppliers quote different weights for the same material?
Moisture, grading and compaction all change the weight of a yard. Wet sand and soil hold water, washed stone drains, and a yard measured loose in a pile weighs less than the same material packed into a base. Use these figures to plan, then ask your supplier for the weight per yard they actually sell by.
Convert your own quantity
Have a number of cubic yards or tons to convert? The cubic yards to tons converter uses the starred figures above and works in both directions. For a whole project, from the depth of a gravel driveway to the soil for a raised bed, Build Material Planner's planners work out the quantity first.
Cite this table
Referencing this table in coursework, an article or a project write-up? Grab a citation in the format you need: