ConstructionConverter

Board Foot Calculator

Calculate board feet from a board's thickness, width and length, with a quantity and a price per board foot for the total cost. Or convert linear feet to board feet for standard lumber sizes like 2x4 and 2x6.

Board feet from thickness, width and length

Enter the board's size in inches and its length. Add a quantity and a price per board foot for a total cost.

Linear feet to board feet by lumber size

Pick a standard nominal size (2x4, 2x6, 1x12 and more) and convert in either direction.

A board labeled with thickness, width and length, converting via the board-foot formula into a board-feet total Board feet (thickness × width × length) ÷ 12 length (ft) T width

Example: A 2×4 that is 8 ft long

These are example numbers, already worked out. Change the inputs above and press the button to work out your own.

Board
2 in × 4 in × 8 ft
Quantity
1 piece

Board feet

5.33 board feet

Board feet per piece
5.33
Cubic feet
0.44 cu ft

Estimate only, worked out from the inputs shown. Confirm the order with your supplier; for slabs, posts, footings or a roof, check local building code and a licensed contractor.

Assumptions

  • Board feet = thickness (in) × width (in) × length (ft) ÷ 12, for one piece, multiplied by the quantity.
  • The thickness and width are used exactly as you entered them. Lumber yards price softwood framing lumber by its nominal size (a 2x4 counts as 2 × 4), and hardwood by its rough thickness (4/4 = 1 in, 8/4 = 2 in).
  • Reference sizes as of 2026-09; confirm exact sizes and how your supplier rounds with them.

How to calculate board feet

A board foot is a piece of lumber 12 inches by 12 inches by 1 inch, or 144 cubic inches. To find the board feet in a board:

Board feet = thickness (in) × width (in) × length (ft) ÷ 12

  1. Measure the thickness and width in inches.
  2. Measure the length in feet. If you measured it in inches, divide by 12 first, or divide the final product by 144 instead of 12.
  3. Multiply the three numbers together and divide by 12.
  4. Multiply by the number of identical pieces, then by the price per board foot for the cost.

Examples

Board feet in common lumber sizes

Board feet use the nominal size, the name the lumber is sold under. The finished (actual) size is smaller because the board is planed after sawing. Pick your size and length below to see the board feet in one piece.

Nominal size Actual size (in) Per linear ft 8 ft 10 ft 12 ft 16 ft
1×4 0.75 × 3.5 0.33 2.67 3.33 4 5.33
1×6 0.75 × 5.5 0.5 4 5 6 8
1×8 0.75 × 7.25 0.67 5.33 6.67 8 10.67
1×10 0.75 × 9.25 0.83 6.67 8.33 10 13.33
1×12 0.75 × 11.25 1 8 10 12 16
2×4 1.5 × 3.5 0.67 5.33 6.67 8 10.67
2×6 1.5 × 5.5 1 8 10 12 16
2×8 1.5 × 7.25 1.33 10.67 13.33 16 21.33
2×10 1.5 × 9.25 1.67 13.33 16.67 20 26.67
2×12 1.5 × 11.25 2 16 20 24 32
4×4 3.5 × 3.5 1.33 10.67 13.33 16 21.33
6×6 5.5 × 5.5 3 24 30 36 48

Sizes and finished dimensions as of 2026-09; they can vary slightly by mill.

Hardwood board feet and quarter thickness (4/4, 8/4)

Hardwood is sold by the board foot, with thickness quoted in quarters of an inch. Enter the thickness in inches in the calculator above. Ask your supplier how they measure and round width and length, and for boards of different sizes, calculate each one and add the board feet.

Quarter notation Thickness (in) Board feet per sq ft of face
4/4 1 1
5/4 1.25 1.25
6/4 1.5 1.5
8/4 2 2
10/4 2.5 2.5
12/4 3 3
16/4 4 4

How to work out the cost by the board foot

Total cost = total board feet × price per board foot. For example, 10 pieces of 1×6×8 ft are 40 board feet, so at $5.00 per board foot (an example price) they cost $200.00. This calculator does not know current prices; enter your supplier's quote in the price field. It does not include tax, delivery or extra for cut-off waste.

Building a wood fence and need the lumber list first? The fence calculator on Build Material Planner counts the posts, rails and pickets, with waste and a cost range.

Run this example →

Convert linear feet to board feet by lumber size

If you have a length of a standard size, the second form above converts in either direction using the nominal size. It also shows the finished size and the face coverage of the board, which uses the actual width because that is what covers a deck or wall.

  • Linear feet → board feet: nominal thickness × nominal width × length (ft) ÷ 12.
  • Board feet → linear feet: board feet × 12 ÷ (nominal thickness × nominal width).
  • Face coverage: actual width ÷ 12 × length (ft).

Run this example (8 linear feet of 2×6) →

MBF prices, plywood, rough lumber and logs

The thickness × width × length rule covers a single board. These cases trip people up because the yard, the mill or the sawyer counts differently.

  • Prices per MBF. Wholesale and mill quotes are per thousand board feet. Divide by 1,000 to get a price you can enter above: at $1,200.00 per MBF, a 2×10 that is 16 ft long holds 26.67 board feet and costs $32.00.
  • Random widths. Hardwood often comes in mixed widths. Add up the widths of boards that share a thickness and length, then run the formula once. Three 4/4 boards 8 ft long at 5, 7, 6.5 in wide total 18.5 in, so 1 × 18.5 × 8 ÷ 12 = 12.33 board feet.
  • Rough versus surfaced. A 4/4 board planed on both faces finishes near 13/16 in, yet it is still billed as 4/4. You pay for the rough thickness, so plan your project around the finished size.
  • Plywood and sheet goods. Sheets are priced per sheet. If you want to compare them with solid lumber, a 3/4 in 4 × 8 ft sheet works out to 24 board feet.
  • Waste. The formula counts what you buy, not what survives the saw. Framing typically needs about 10% extra; furniture-grade hardwood needs 20 to 30% once defects are cut out.
  • Logs and standing trees. Timber buyers use log rules that subtract saw kerf and slabs. The Doyle rule, (diameter − 4)² × length ÷ 16, gives 256 board feet for a 16 ft log with a 20 in small end. Scribner and International rules give higher yields for the same log, so ask which rule a buyer uses.

Frequently asked questions

How do you calculate board feet?

Multiply the board's thickness in inches by its width in inches by its length in feet, then divide by 12. A 2x4 that is 8 feet long is 2 × 4 × 8 ÷ 12 = 5.33 board feet. For several identical boards, multiply the result by the number of pieces.

How many board feet are in a 2x4x8?

5.33 board feet: 2 × 4 × 8 ÷ 12. Lumber yards count a 2x4 by its nominal 2-inch by 4-inch size, not its smaller finished size of 1.5 by 3.5 inches.

How many board feet are in a 2x6, 2x8, 2x10 and 2x12?

A 2x6 is 1 board foot per linear foot, a 2x8 is 1.33, a 2x10 is 1.67 and a 2x12 is 2. An 8-foot piece is 8, 10.67, 13.33 and 16 board feet.

Do board feet use nominal or actual size?

Nominal. Dimensional lumber is measured and priced by the size it is sold as, so a 2x6 counts as 2 inches by 6 inches even though it is milled to 1.5 by 5.5 inches. Enter the nominal thickness and width in the calculator to match what the yard charges. For hardwood, use the rough thickness it is sold at, such as 4/4 or 8/4.

How do you calculate board feet when the length is in inches?

Multiply thickness, width and length, all in inches, then divide by 144. A board 1 inch thick, 6 inches wide and 96 inches long is 1 × 6 × 96 ÷ 144 = 4 board feet, the same as 1 × 6 × 8 ft ÷ 12. In the calculator, switch the length unit to inches.

How do you calculate the cost of lumber by the board foot?

Multiply the total board feet by the price per board foot. 10 pieces of 1x6x8 ft are 40 board feet, so at $5.00 per board foot they cost $200.00. The price is only an example; enter your supplier's price in the calculator.

What do 4/4 and 8/4 mean on hardwood?

Hardwood thickness is quoted in quarters of an inch: 4/4 is 1 inch, 5/4 is 1.25 inches, 6/4 is 1.5 inches and 8/4 is 2 inches. Enter that thickness in inches to get board feet, for example 8/4 (2 in) × 6 in wide × 8 ft long is 8 board feet.

How many board feet are in a cubic foot?

12. A board foot is a piece 12 inches by 12 inches by 1 inch, which is 144 cubic inches, or one twelfth of a cubic foot (1,728 cubic inches).

What is the difference between board feet and linear feet?

Linear feet measure length only. Board feet measure volume, so thickness and width count too: 10 linear feet of a 2x12 is 20 board feet, while 10 linear feet of a 1x4 is 3.33.

What does MBF mean in lumber pricing?

MBF is a thousand board feet, the unit mills and wholesale yards quote. Divide the MBF price by 1,000 for the price of one board foot: $1,200.00 per MBF is $1.20 a board foot, so a 2x10x16 (26.67 board feet) costs $32.00.

How many board feet are in a sheet of plywood?

Plywood is sold by the sheet, not the board foot, but its volume can be expressed that way. A 3/4 in sheet of 4 × 8 ft is 0.75 × 48 × 8 ÷ 12 = 24 board feet, and a 1/2 in sheet is two thirds of that.

How much extra lumber should I buy for waste?

For framing cut from standard lengths, about 10% covers offcuts and the odd bad board. Hardwood for furniture or trim usually needs 20 to 30% more than the finished parts, because knots, checks and sapwood get cut out. Add the allowance to the board feet before you work out the cost.

Is board feet the same for a log as for sawn lumber?

No. A log's board feet is an estimate of the lumber it will yield after saw kerf and slabs, worked out with a log rule such as Doyle, Scribner or International. On a 16 ft log with a 20 in small end, the Doyle rule gives (20 − 4)² × 16 ÷ 16 = 256 board feet, which is far less than the log's solid volume.

How many linear feet is 100 board feet of 2x6 lumber?

100 linear feet, because a 2x6 is exactly 1 board foot per linear foot (2 × 6 ÷ 12). For other sizes, divide the board feet by the size's board feet per linear foot, for example 100 ÷ 0.67 = 150 linear feet of 2x4.

Limitations

The calculator treats every piece as identical and uses the sizes you enter. Actual (finished) dimensions can vary slightly by mill and by whether lumber is surfaced or rough-cut, and suppliers may round widths and lengths their own way, so confirm exact sizes and measuring practice with your supplier. It does not look up prices, apply volume pricing tiers or add an allowance for waste.

Put this converter on your site

Run a site for suppliers, contractors or DIYers? You can embed the Board Foot Calculator as a free widget — responsive, no registration, and nothing added to your page beyond the calculator itself.

Cite this converter

Referencing this converter in coursework, an article or a project write-up? Grab a citation in the format you need:

APA
MLA
Link (HTML)

Related converters